Lamineringsmaskin OneLam 400 A3 HP

Art.nr: HP3161

699,-

Antall:

Informasjon

The modern HP OneLam 400 A3 has an intuitive function button that sets the required temperature based on the selected film thickness and this reliable assistant heats up in 2-4 minutes.

A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating project right away. The cutting ruler and the corner scraper can be stored in a handy compartment underneath the device so that you always have the accessories at hand.

With a speed of 400 millimetres per minute, theHP OneLam 400 A3thereforelaminates an A3 document in about 60 seconds. If you have inserted the film into the laminator at an angle, this can lead to a film jam. Thanks to the roller release lever, the film can be carefully released and pulled out on the input side and the foil jam rectified.

If you forget to switch off the device via the main switch, the heating process is stopped after 30 minutes and the laminator switches to standby mode.

The device

Range of application: private households / hobby requirements, office workstations
Laminating formats: from business cards to DIN A3 format
Warm-up time: 2 - 4 minutes for 80 microns
Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
Application: Hot and cold lamination
Laminating speed: 400 mm per minute
Backloader: fold-out lid as insertion aid on the rear side
Temperature: 120 - 150 degrees celsius
Heating system: 2 rollers are heated from the inside
Input width: 330 mm
Colour: white